CATEGORIES
TRUST THE EXPERTS, LET'S BUILD IT RIGHT!
Products
-
Vendor:CNC machined from 6061-T6 aluminum, heavy-duty double sealed bearing is precision-fit into the bore. This pulley will insure a better belt wrap thus less chances of belt slippage. Includes mounting bracket. Initially designed for the 4.0L Whipple, this bracket will also work with factory...Regular price $190.00 USDRegular priceUnit price per
-
Vendor:IMRC lockouts also know as CMCV (Charge Motion Control Valve) Delete Plates. Simple install that reuses factory hardware. Direct bolt-on on 2018-2022 Mustang and F-150 Intake manifolds. Required when installing 2018-22 intake manifold on 2011-14 Mustang CNC laser cut aluminum Precision fit, no adjustment...Regular price $18.00 USDRegular priceUnit price per
-
Vendor:Protect your paint while tuning at the track or in the shop. The BPS Laptop Tuning Pad creates a clean, stable surface so you can place your laptop on your car without worrying about scratches or sliding. Features • Protects vehicle paint when using...Regular price $15.00 USDRegular priceUnit price per
-
Vendor:This kit includes a pair of 10.5” drilled and slotted rotors, a pair of lightweight relocation brackets for the OEM calipers and ABS mounting brackets. This kit does require temporary removal of the axles to remove the factory caliper bracket but is fairly easy and quick to do....Regular price From $230.00 USDRegular priceUnit price per
-
Vendor:This kit is for a complete replacement of all idlers on 2007-2014 GT500’s. All pulleys are hard black anodized to ensure a durable and long lasting finish. They also come preinstalled with premium bearings. 2007-2010 packages include: 1x Lightweight High Tension Smooth Idler 1x Lightweight AC...Regular price From $610.00 USDRegular priceUnit price per
-
Vendor:This Radiator Support is a direct replacement for all 05-14 mustangs who do not use the front sway bar. Weighing in at 1 pound 5 ounces for the pair, you will be saving at minimum a little over 25lbs at the nose of your vehicle! (including removal of sway...Regular price $140.00 USDRegular priceUnit price per
-
Vendor:BPS Low-Pro Series Adapter Fittings were designed especially for those tight spaces. Our fittings have an overall reduced height compared to other offerings currently available. Features: Low profile overall height CNC machined 6061-T6 aluminum Black anodized finish Includes O-ringRegular price From $22.00 USDRegular priceUnit price per
-
Vendor:Other than the obvious weight savings (5.5lbs), removing the factory mirrors will help with drag at high speeds. Perfect for quarter mile, half mile and mile racing! These precision machined pieces will perfectly fill the void once the mirrors are removed and install like...Regular price $175.00 USDRegular priceUnit price per
-
Vendor:Included is a pair of CNC machined aluminum tags to be attached underneath your existing 5.0 emblems. These come ready with 3M tape, simply peel, align and stick onto your fender.Regular price From $72.00 USDRegular priceUnit price per
-
Vendor:Keep your fittings leak-free with these direct replacement O-rings for BPS Low-Pro Series Adapter Fittings. Compatible with BPS Low-Pro Series Fittings (U008) Sold in packs of 10 High-temp, fuel/oil-resistant material Ideal for maintenance or sparesRegular price From $9.00 USDRegular priceUnit price per
-
Vendor:Billet CNC machined brackets to retain your alternator in the stock location when removing OEM oil cooler. The upper bracket is located using the OEM spring pin to insure proper fitment and reuses factory bolts. The lower bracket is mounted on the front of...Regular price $210.00 USDRegular priceUnit price per
-
Vendor:Oil squirters are often removed in engine builds due to interference with aftermarket rods. Our block offs install and fit like OEM and include all necessary hardware. Features: CNC machined billet 6061-T6 aluminum Precision machined to properly seal bore Button head bolts for...Regular price $65.00 USDRegular priceUnit price per
-
Vendor:Oil squirters are often removed in engine builds due to interference with aftermarket rods. Our block offs install and fit like OEM and include all necessary hardware. Features: CNC machined billet 6061-T6 aluminum Precision machined to properly seal bore Button head bolts for...Regular price $120.00 USDRegular priceUnit price per
-
Vendor:Required for NHRA, our battery disconnect switches are easily accessible in case of emergency. Battery switch is rated at 175 continuous amps. All CNC machined billet 6061-T6 aluminum parts. Black anodized for a durable long lasting finish. Includes: 2484-16 Continuous 175 AMP (12V) Switch...Regular price $190.00 USDRegular priceUnit price per
-
Vendor:This kit includes (1) bracket for the top and (1) bracket for the bottom shock travel sensor. The mounting holes have a diameter of 1/2'' and the shock mounting hole has a diameter of 0.1950''. Sold as a pair.Regular price $16.00 USDRegular priceUnit price per
-
Vendor:High quality and durable vinyl banner featuring our logo. Perfect for your shop, home garage or man cave!Regular price $50.00 USDRegular priceUnit price per
-
Vendor:The ultimate setup to free up every bit of HP out of your engine. Our Single belt drive setup deletes the accessory belt along with its pulleys and transfers the alternator to the passenger side. This in hand will also require you to delete...Regular price $2,000.00 USDRegular priceUnit price per
-
Vendor:Keep your spark plugs organized and secure between passes. Holds up to 8 spark plugs 0.100" aluminum construction Sits on anti-slip rubber bumpersRegular price $24.00 USDRegular priceUnit price per
$30.00 USDSale price $24.00 USD -
Vendor:Our perches will allow you to fine tune your ride height with a simple twist of the retaining ring. Offers 1.25” in adjustability which is more than sufficient to get your car sitting right. Features: CNC machined 6061-T6 aluminum Hard anodized for durability No fabrication...Regular price From $130.00 USDRegular priceUnit price per
-
Vendor:BPS supercharger pulleys are stock look and made of high grade steel.Precision machined borePress fit just like OEMMachined to OEM specsAll pulleys are powdercoated for a nice and long lasting finish Engineering and Manufacturing note: The final manufacturing step is honing the bore to...Regular price $159.00 USDRegular priceUnit price per
-
Vendor:Installing 15” drag wheels won’t happen with the stock location of the swaybar. These relocation brackets move the swaybar up higher to accommodate your new wheels. This kit includes two (2) Stainless Steel Relocation Brackets and all the necessary hardware.Regular price $45.00 USDRegular priceUnit price per
-
Vendor:BPS throttle body brackets for the Holley race series Coyote intake manifolds are a direct bolt-on solution for your throttle cable. Features: 4130 chromoly laser cut and CNC formed black zinc coated includes stainless hardware no modifications needed to installRegular price $30.00 USDRegular priceUnit price per
-
Vendor:A direct replacement gasket for our BPS High-Flow Plenum (Part #I001), designed for 2007–2014 GT500-style bolt patterns. Rubberized cork construction Seals perfectly between throttle body and plenum Compatible with BPS High-Flow Plenums Helps prevent boost leaks and ensures consistent airflowRegular price $12.00 USDRegular priceUnit price per
-
Vendor:This idler is a stock size replacement for the steel GT500 Thump Tensioner pulley. Our pulleys are hard black anodized to ensure a durable and long lasting finish. They also come preinstalled with premium bearings. *DOES NOT INCLUDE TENSIONER* Weight comparisons: Thump: 478g (1.05lb)...Regular price $70.00 USDRegular priceUnit price per
